Lival Licker Konz.
Item number
8520010211
Regreasing agents
Description
Lival Licker Konz. is a highly concentrated special product developed for cleaning and re-greasing suede and nubuck leather. Based on high-quality natural oils, it renews the natural supple feel and loosens the pile, to present the leather in its best condition.
Application
Lival Licker Konz. is used both for re-greasing and as a leather lickert when washing leather or for re-spraying leather that has been cleaned in an organic solvent. It is also used to freshen up the colors of silk items.Lival Licker Konz. is a very efficient, concentrated oil preparation with a small amount of wetting, wash-active emulsifiers. It spontaneously forms a milky microemulsion with water.As a leather lick for leather parts that have been cleaned in perc or KWL:Lival Licker Konz. is diluted with water at a ratio of approx. 1:10; add Lival Licker Konz. while stirring. Approx. 200 ml of this emulsion is sprayed evenly onto each leather part using a spray gun. The leather should be moistened evenly. The treated parts are air-dried for approx. 60 minutes and then tumbled. The tumbling equalizes the fatty substances. PU plastic sponges are added for suede leather. This increases the color brilliance and the writing effect.
Use for silk items
Individual silk items are treated by hand in an immersion process to restore their grease and color. Approx. 75 ml of Lival Licker Konz. is thoroughly mixed with 10 liters of tap water, with the water being added first. The silk garm Smooth leather in KWL: 10 ml/l Lival Licker Konz.For sole re-lubrication within the machine, the product – diluted in the respective solvent – can also be sprayed onto the wet goods. For this purpose, 20 - 30 ml Lival Licker Konz. per item is diss
Individual silk items are treated by hand in an immersion process to restore their grease and color. Approx. 75 ml of Lival Licker Konz. is thoroughly mixed with 10 liters of tap water, with the water being added first. The silk garm Smooth leather in KWL: 10 ml/l Lival Licker Konz.For sole re-lubrication within the machine, the product – diluted in the respective solvent – can also be sprayed onto the wet goods. For this purpose, 20 - 30 ml Lival Licker Konz. per item is diss
Technical features
Color: | yellowish |
---|---|
GHS: | GHS07 |
PH scale: | 6 - 7,9 neutral |
PH value: | 6,0 - 7,0 ; 10 % |
Physical State: | liquid |
VOC content: | 0,51 |
Water hazard class: | WGK 1 |
Package: | Canister |
Care Symbols: | Textile care symbol W, Textile care symbol SENSENE, Textile care symbol P, Textile care symbol F |
Safety instructions
- Signal word
- Warning
- Dangerous goods
- No
- GHS labeling
-
- Water hazard class
- WGK 1
- H-phrases
- H319: Causes serious eye irritation.
- P-phrases
- P280.9: Wear eye protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention.
- detail.safetyParts.productStorageClassification
- 10 Flammable liquids
- Customs tariff number
- 34039100