SpotX Rust
Item number
8410004202
Rust remover
Description
Application
SpotX Rust is a rust remover in our SpotX series for professional users.All products in our SpotX series can be used as pre- and post-spotting agents in the solvents perchloroethylene (PER) and water.With hydrocarbon solvents (KWL), Sensene or other solvents in accordance with 31st BImSchV, the products in the SpotX series may only be used as post-spotting agents. Application as a pre-spotting agent with these solvents must be carried out according to the working methods for post-spotting due to insufficient rinsing behavior or the risk of lowering the flash point.We recommend a hem test before using the SpotX series on delicate garments and textiles with low color fastness.
1. pre-detachment (PER, water)
a) PER
Due to the poor rinsability and low pH value, the post-detachment methods must be used. It must be rinsed well with water and neutralized as required.
Ensure effective extraction, do not inhale aerosols.
b) Wet cleaning/washing
The detached area must be pre-rinsed with water and neutralized if necessary, then the area is covered with a brushing agent for wet cleaning/washing.
Treated parts should be washed after 20 minutes at the latest.
2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.
a) PER
Due to the poor rinsability and low pH value, the post-detachment methods must be used. It must be rinsed well with water and neutralized as required.
Ensure effective extraction, do not inhale aerosols.
b) Wet cleaning/washing
The detached area must be pre-rinsed with water and neutralized if necessary, then the area is covered with a brushing agent for wet cleaning/washing.
Treated parts should be washed after 20 minutes at the latest.
2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.
Technical features
| Fysieke staat: | liquid |
|---|---|
| GHS: | GHS05 |
| Kleur: | colorless to yellowish |
| PH-schaal: | 0 - 5,9 zuur |
| PH-waarde: | 4,0 |
| VOC-gehalte: | 10,00, VOC-vrij |
| Watergevarenklasse: | WGK 1 |
| Pakket: | Canister |
Safety instructions
- Signal word
- Danger
- Dangerous goods
- Yes
- Hazard-determining component (labeling)
- ammonium bifluoride,phosphoric acid
- GHS labeling
-
- Water hazard class
- WGK 1
- H-phrases
- H314: Causes severe skin burns and eye damage.
- P-phrases
- P280.2: Wear protective gloves/ eye/ face protection. P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor.
- detail.safetyParts.productStorageClassification
- 8A Flammable corrosive hazardous substances
- Customs tariff number
- 34029090
