SpotX Resin

SpotX Resin is a paint and resin solvent in our SpotX series for professional users.All products in our SpotX series can be used as pre- and post-spotting agents in the solvents perchloroethylene (PER) and water.With hydrocarbon solvents (KWL), Sensene or other solvents in accordance with 31st BImSchV, the products in the SpotX series may only be used as post-spotting agents. Application as a pre-spotting agent with these solvents must be carried out according to the working methods for post-spotting due to insufficient rinsing properties or the risk of lowering the flash point.We recommend a hem test before using the SpotX series on delicate garments and textiles with low color fastness. 1. pre-spotting (PER, water)

a) PER
Cover the detached area with a brushing agent.

b) wet cleaning/washing
Pre-rinse with water and cover the detached area with a brushing agent for wet cleaning, or use the post-detachment methods due to poor rinsing properties. Rinse the detachment area well with water and vacuum it up; it is not necessary to dry it.
Treated parts should be washed/wet-cleaned after 20 minutes at the latest.


2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.