SpotX Ink
Item number
8410006203
Oil and grease remover
Description
Application
SpotX Ink is an oil and grease remover in our SpotX series for professional users.All products in our SpotX series can be used as pre- and post-spotting agents in the solvents perchloroethylene (PER) and water.With hydrocarbon solvents (KWL), Sensene or other solvents in accordance with 31st BImSchV, the products in the SpotX series may only be used as post-spotting agents. Application as a pre-spotting agent with these solvents must be carried out according to the working methods for post-spotting due to insufficient rinsing properties or the risk of lowering the flash point.We recommend a hem test before using the SpotX series on delicate garments and textiles with low color fastness.
1. pre-spotting (PER, water)
<b<a) PERPER
The detached area must be covered with a brushing agent.
b) wet cleaning/washing
Pre-rinse with water and cover the detached area with a brushing agent for wet cleaning, or use the methods of post-deachment due to the poor rinsability.
Rinse the detachment area well with water and vacuum it; it is not necessary to dry it.
Treated parts should be cleaned after 20 minutes at the latest.
2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.
<b<a) PERPER
The detached area must be covered with a brushing agent.
b) wet cleaning/washing
Pre-rinse with water and cover the detached area with a brushing agent for wet cleaning, or use the methods of post-deachment due to the poor rinsability.
Rinse the detachment area well with water and vacuum it; it is not necessary to dry it.
Treated parts should be cleaned after 20 minutes at the latest.
2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.
Technical features
| Fysieke staat: | liquid |
|---|---|
| GHS: | GHS02, GHS05, GHS07 |
| Kleur: | yellowish |
| PH-schaal: | 8 - 14 akalisch |
| PH-waarde: | 7 - 8 |
| VOC-gehalte: | 45,00 |
| Watergevarenklasse: | WGK 2 |
| Pakket: | Canister |
Safety instructions
- Signal word
- Danger
- Dangerous goods
- Yes
- Hazard-determining component (labeling)
- Benzenesulfonic acid, 4-C10-13-sec-alkyl derivs.,amides, coco, N,N-bis(hydroxyethyl),n-butyl acetate
- GHS labeling
-
- Water hazard class
- WGK 2
- H-phrases
- H226: Flammable liquid and vapour. H315: Causes skin irritation. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. H412: Harmful to aquatic life with long lasting effects.
- P-phrases
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261.9: Avoid breathing mist/ vapours/ spray. P280.2: Wear protective gloves/ eye/ face protection. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- detail.safetyParts.productStorageClassification
- 3 Flammable liquids
- Customs tariff number
- 34029090
