SpotX Decol

SpotX Decol is a special dye solvent and a component of our SpotX series for professional users.SpotX Decol may only be used as a pre-spotting agent using the night spotting method in the solvent perchloroethylene (PER).With hydrocarbon solvents (KWL), Sensene or other solvents in accordance with 31st BImSchV, the products in the SpotX series may only be used as a night spotting agent. Application as a pre-spotting agent with these solvents must be carried out according to the working methods for post-spotting due to insufficient rinsing properties or the risk of lowering the flash point.We recommend carrying out a hem test before using the SpotX series on delicate garments and textiles with low color fastness. 1. pre-spotting (PER, water)

a) PER
Due to the poor rinsing properties and the high pH value, only the post-spotting methods may be used.
Rinse sensitive textiles (e.g. wool, silk) well with water and neutralize.
Ensure effective extraction, do not inhale aerosols.


b) Wet cleaning/washing
If textiles to be detached are wet cleaned or washed, rinsing with water is not always necessary.
Rinse sensitive textiles (e.g. wool, silk) well with water and neutralize. Brush the area with a brushing agent for wet cleaning.
Treated parts should be cleaned after 20 minutes at the latest.


2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the spot and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction and do not inhale aerosols.All SpotX series spotting agents can be rinsed without rinsing.