SpotX Blood

SpotX Blood is a blood solvent in our SpotX series for professional users.All products in our SpotX series can be used as pre- and post-spotting agents in the solvents perchloroethylene (PER) and water.With hydrocarbon solvents (KWL), Sensene or other solvents in accordance with 31st BImSchV, the products in the SpotX series may only be used as post-spotting agents. Application as a pre-spotting agent with these solvents must be carried out according to the working methods for post-spotting due to insufficient rinsing behavior or the risk of lowering the flash point.We recommend a hem test before using the SpotX series on delicate garments and textiles with low color fastness. 1. pre-spotting (PER, water)

a) PER
Rinse the spotting agent with water, allow to dry and cover the still damp area with brushing agent. For sensitive textiles (e.g. wool, silk), the stain area must be rinsed well with water and dried completely; the post-datching method is recommended. Ensure effective extraction, do not inhale aerosols.


b) Wet cleaning
If the detaching textiles are wet-cleaned or washed, it is not necessary to rinse and dry the treated stain areas.
In the case of sensitive textiles (e.g. wool, silk), the stain area must be neutralized/acidified.
Treated items should be cleaned after 20 minutes at the latest.


2. post-spotting (PER, water and KWL)Allow the spotting agent to work on the stain area and, if necessary, support the effect with mechanical means (spatula, brush) and/or steam. The treatment area is then rinsed with water under suction and dried with air.Ensure effective suction, do not inhale aerosols.All spotting agents in the SpotX series can be rinsed out without rinsing.