SolventClean ACT

SolventClean ACT is a high-boiling solvent-based cleaner. It is suitable for direct use in machine cleaning or manual cleaning. Residues from all ink systems (UV, water-based and solvent-based) are removed very effectively by SolventClean ACT even at room temperature. The cleaner is also suitable for removing adhesives, e.g. from the backs of printing plates. For particularly thick layers with a high degree of cross-linking of the ink systems to be cleaned, manual spraying of the adhesions and an exposure time of 5 - 10 minutes is recommended before machine cleaning. Solventclean ACT can be distilled. Suitable surfaces: Steel, stainless steel, aluminium, aluminium alloys, galvanized material, non-ferrous metals, PTFE (polytetrafluoroethylene), EPDM (ethylene propylene terpolymer rubber), silicone rubber (SI) Only treat after testing: Plastics such as nitrile rubber (NBR)Unsuitable surfaces: FPM/FKM (fluoropolymer/viton) and especially PVC (polyvinyl chloride) are usually not recommendedArea of application: manual and mechanical processFor removal of: UV-, water- and solvent-based paint systems, adhesives