Sicherheitskraftreiniger

Safety Power Cleaner is used in a wide variety of industrial sectors as a mild all-purpose cleaner for basic and maintenance cleaning. In the industrial sector, the cleaner is particularly suitable for use with HD/HW or spraying equipment for cleaning and degreasing repair parts, metal surfaces and floors. Safety Power Cleaner is also used for cleaning vehicle interiors with very good results. Specially selected ingredients enable particularly gentle cleaning.Safety Power Cleaner does not form stable emulsions if the recommended application parameters are observed. Oils and greases are separated in simple oil separators after only a short standing time, thus achieving favorable residual oil values in the waste water without emulsion splitting systems. Safety Power Cleaner can be mixed with water in any ratio. The application concentration depends on the soiling of the surfaces to be cleaned. After a short exposure time, the cleaning solution is rinsed off thoroughly with clear water, in food processing companies with drinking water. When using the product for the first time, carry out a test application on a concealed area to check the compatibility of the material. If the product is applied via nozzles, a non-misting nozzle should be used. When pre-diluting, follow the instructions of the equipment manufacturer.

The product can also be diluted with water at a ratio of up to 1:5 using a sprayer (spray pressure max. 10 bar) or diluted with water at a ratio of up to 1:20 using HP/HW equipment (measured at the nozzle).