Produktbilder können abweichen
Paste S Special agent for manual cleaning
Product number: 8730892109
Description
Paste S is a special agent for manual cleaning. The product is suitable for manual brushing or brushing on and reliably removes cross-linked printing inks, paints and varnishes. The flash point of Paste S is over 95 °C according to DIN EN 22719-A.
Application
Paste S is a special acidic agent for direct application. Paste S removes cross-linked printing inks, paints and varnishes from stainless steel. Ceramic surfaces and other materials must be tested for resistance before treatment. Paste S is applied undiluted to the dry surfaces to be cleaned or brushed on. The exposure time of Paste S depends on the degree of cross-linking and the layer thickness of the printing inks, paints and varnishes to be removed, but should not exceed 20 minutes at 25 °C. Warning! Avoid diluting Paste S with water or solvents!
Instructions for use:
It is recommended to remove residual adhesions of Paste S from the cleaned surfaces by rinsing with plenty of water or immersing in water and then wiping off.
Disposal: It is recommended to neutralize the acidic rinsing water of Paste S by carefully adding KS Neutralizing Agent (pH 7-8). For neutralization, approx. 1 liter of neutralization lye is required for 1 liter of Paste S. Only mix Paste S with the neutralization lye in aqueous dilution.
Example calculation:
1 L of Paste S diluted in 200 L of water requires approx. 1 L of KS Neutralizing Agent for neutralization.
The treated rinsing water can be discharged in compliance with local official regulations.
Suitable surfaces: Stainless steelOnly treat after testing: Ceramics and other materialsField of application: manual process by spraying or brushingFor removal of: cross-linked printing inks, paints and varnishes from stainless steel
Technical features
- Color:
- colorless, cloudy
- PH value:
- 1,2 ; 1 %
- Physical State:
- pasty
- VOC content:
- 0,00, VOC-free
Downloads
Safety instructions
- Signal word
- Danger
- Dangerous goods
- Yes
- Hazard-determining component (labeling)
- Sulphuric acid
- GHS labeling
-
- H-phrases
- H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals.
- P-phrases
- P280.2: Wear protective gloves/ eye/ face protection. P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor.
- detail.safetyParts.productStorageClassification
- 8A Flammable corrosive hazardous substances
- Customs tariff number
- 34029090