Orbin Evolve
Item number
7040001210
Ecological mildly alkaline foam cleaner
Listing
Description
Orbin Evolve is an ecological, mildly alkaline foam cleaner based on a mixture of active ingredients made from 100% natural, renewable raw materials. With its pronounced grease and protein dissolving power, it enables effective cleaning of alkali-compatible surfaces and aluminum. Orbin Evolve is particularly gentle on materials.
Application
Orbin Evolve is a mildly alkaline foam cleaner for removing grease and protein from all alkali-compatible surfaces and aluminum. Based on a mixture of active ingredients made exclusively from natural, renewable raw materials, it achieves cleaning results that were previously only possible with strongly alkaline cleaners. Soiling is emulsified within a relatively short reaction time of up to 10 minutes and can then be easily rinsed off. Both the comparatively low volume of rinsing water and the relatively low pH value reduce the impact of the cleaner on the quantity and quality of waste water and therefore have a clearly positive ecological effect. Orbin Evolve preserves the original shine of cleaned surfaces and makes the use of acidic cleaners or stainless steel care oils unnecessary or reduces them to a minimum. Orbin Evolve has been developed for cleaning in the following industries
Food and beverage industry, e.g. for use on walls, processing machines, containers, equipment, tanks, floors and work surfaces. Orbin Evolve also removes grease and protein residues quickly and reliably in commercial kitchens. It can be used both as a foam cleaner and for manual cleaning and develops excellent cleaning power. Using a suitable foaming system, a stable, well-adhering foam is achieved with 4 to 6 bar air outlet pressure.
Procedure Foam cleaning:
1. Coarse dirt removal
2. Pre-rinsing with water
3. Lather the surface to be cleaned with the specified contact time
4. Rinse with water of drinking water quality
Manual cleaning procedure:
1. Apply cleaning solution to the surface with a sprayer, sponge or brush; if possible, massage in gently
2. After the exposure time, rinse with sufficient clear water of drinking water quality
Procedure Foam cleaning:
1. Coarse dirt removal
2. Pre-rinsing with water
3. Lather the surface to be cleaned with the specified contact time
4. Rinse with water of drinking water quality
Manual cleaning procedure:
1. Apply cleaning solution to the surface with a sprayer, sponge or brush; if possible, massage in gently
2. After the exposure time, rinse with sufficient clear water of drinking water quality
Technical features
| Color: | colorless to yellowish |
|---|---|
| GHS: | GHS05 |
| PH scale: | 8 - 14 akalisch |
| PH value: | 10,5 ; 1 % |
| Physical State: | liquid |
| VOC content: | 10,00, VOC-free |
| Water hazard class: | WGK 1 |
| Package: | Canister |
| Listung: | EU Ecolabel listed |
| Eco-friendly products: | Ecological products |
Safety instructions
- Signal word
- Danger
- Dangerous goods
- No
- Hazard-determining component (labeling)
- D-Glucopyranose, oligomers, decyl octyl glycosides,D-Glucopyranose, oligomeric, C10-16 alkyl glycosides,sodium carbonate
- GHS labeling
-
- Water hazard class
- WGK 1
- H-phrases
- H318: Causes serious eye damage.
- P-phrases
- P280.6: Wear eye/face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor.
- detail.safetyParts.productStorageClassification
- 10-13 Other combustible and non-combustible materials
- Customs tariff number
- 34029090
